Veröffentlichungsliste

2025

2024

S. Schulte, H. Schäfer, C. Vogel et al.
Environmentally Resistant Flax Fiber-Reinforced Composites for Aircraft Applications: Aviation Stress Tests with Optical and Mechanical Analyses; in:
Applied Composite Materials, 20.12.2024, https://doi.org/10.1007/s10443-024-10296-z
 
L. Mundzeck, A. Siebert-Raths
Sind Biokunststoffe eine Lösung für die Plastikkrise? Was Biokunststoffe zu einer zukunftsfähigen Kreislaufwirtschaft beitragen können; in:
Plastverarbeiter, 07/08-2024, S. 32-35
 
L. Mundzeck, C. Amrhein-Bläser, A. Siebert-Raths
Mit Biokunststoffen und Mehrweg zu mehr Klimaschutz; in:
Technologie-Informationen 1-2024, S. 10-11
 
M. Neudecker, S. Kroll, A. Siebert-Raths
Vom Reststoff zum Wertstoff. Spargelsekundärprodukte für biobasierte Extrusionshalbzeuge nutzbar machen; in:
Plastverarbeiter, 03-2024, S. 44-47
 
L. Mundzeck, C. Amrhein-Bläser, A. Siebert-Raths
Mit Biokunststoffen und Mehrweg zu mehr Klimaschutz; in:
Wissen hoch N (20.2.2024), https://doi.org/10.60479/GZWD-Q811
 
IfBB – Institut für Biokunststoffe und Bioverbundwerkstoffe (Hg.)
Biopolymers – facts and statistics 2023, Hannover 2024

S. Schulte, F. Lübkemann-Warwas, S. Kroll, A. Siebert-Raths
Novel olive stone biochar particle network for piezoresistive strain sensing in natural fiber-reinforced composites; in:
Polymer Composites, 2024,1–17, DOI: 10.1002/pc.28160
 

N. Becker, L. Mundzeck, M. Neudecker, S. Kroll, A. Siebert-Raths
Introducing online tools BioPolyDat and DaKeBiKu; in:
bioplastics MAGAZINE/Reneable Carbon Plastics, Vol. 19, 01-2024, S. 24-25

J. Kuckuck, M. Neudecker, S. Kroll, A. Siebert-Raths
Temperaturstabil und trotzdem bio; in:
Kunststoffe 01-2024, S. 64-67

2023

C. Reichert, M. Hoog, M. Tiemann, S. Kroll, A. Siebert-Raths, M. Schmid
PLA-Verpackungen kreislauffähig machen (Forschungsprojekt PLA2Scale – Beitrag 1); in:
Plastverarbeiter, 09/2023, S. 74-75; https://www.plastverarbeiter.de/roh-und-zusatzstoffe/pla-verpackungen-kreislauffaehig-machen-993.html

C. Reichert, M. Hoog, M. Tiemann, S. Kroll, A. Siebert-Raths, M. Schmid
PLA-fibre biocomposite and PLA-starch blends for food packaging applications (PLA food packaging project); in:
bioplastics magazine, 04/2023, S. 32-33; https://epaper.renewable-carbon-plastics.com/html5/MYcjTJt0lb/Tzjf2b5shdjz3/1

IfBB – Institut für Biokunststoffe und Bioverbundwerkstoffe (Hg.)
Biopolymers – facts and statistics 2022, Hannover 2023

S. Kroll
Surface Modification of Ceramic Materials; in:
Laura Treccani, Fabian Meder (Hg.): Surface-Functionalized Ceramics: For Biotechnological and Environmental Applications, Weinheim 2023, S. 84-117; DOI:10.1002/9783527698042

2022

L. Mundzeck, A. Siebert-Raths
Was Biokunststoffe zu einer zukunftsfähigen Kreislaufwirtschaft beitragen können
Blog "Inclusive Productivity" der Bertelsmann-Stiftung (02.11.2022)

H. Schäfer, B. Lühring, M. Neudecker, S. Kroll, A. Siebert-Raths
Ready for Take-off: Bio-based Paint Systems for Natural Fibre Reinforced Plastics for Aviation Applications; in:
ipw / bio-fibre magazine 5-6/2022; http://www.p3-news.com/SubscriptionEn/Article/3cdeddda8b4caae8a5367297

M. Neudecker, S. Kroll, L. Mundzeck, A. Siebert-Raths
Spargelschalen - Vom Abfall zum Werkstoff; in:
Spargel & Erdbeer Profi, 2/2022, S. 20-21

L. Mundzeck, A. Siebert-Raths
Lebensmittel to go: vom Einweg zum Mehrweg mit Biokunststoffen; in:
Wissen hoch N (24.03.2022)

L. Mundzeck, A. Siebert-Raths
Biokunststoffe sollen auch für Hochtemperaturanwendungen im Automobilbereich eingesetzt werden; in:
Blasformen & Extrusionswerkzeuge, 1-2022, S. 30

2021

IfBB – Institut für Biokunststoffe und Bioverbundwerkstoffe (Hg.)
Biopolymers – facts and statistics 2021, Hannover 2021

D. Iliew, S. Kroll, A. Siebert-Raths
Compounding of Natural Fiber Reinforced Plastics; in:
Klemens Kohlgrüber, Michael Bierdel, Harald Rust (Hg.): Plastics Compounding and Polymer Processing: Fundamentals, Machines, Equipment, Application Technology, München 2021, S. 263-278

L. Mundzeck, A. Siebert-Raths
Lebensmittel to go: vom Einweg zum Mehrweg mit Biokunststoffen; in:
Technologie-Informationen 3/2021, S. 30

D. Jahn, S. Kroll, A. Siebert-Raths
Kaffeeinfusion für Kunststoffcompounds; in:
Kunststoffe 10/2021, S. 150-152

D. Jahn, S. Kroll, A. Siebert-Raths
Coffee Infusion for Plastic Compounds: Bioplastics with Coffee Grounds as a Bio-Based Filler; in:
Kunststoffe international 9/2021, S. 14-16

L. Mundzeck, A. Siebert-Raths
Biobasierte Kunststoffe: Definitionen, Anwendungsbereiche, Potenziale und Forschung; in:
Trend Report "Green Economy", 23. März 2021

2020

IfBB – Institut für Biokunststoffe und Bioverbundwerkstoffe (Hg.)
Biopolymers – facts and statistics 2020, Hannover 2020

O. Hansen, N. Ganter, N. Becker
Naturfaserverstärkte Kunststoffe als Baustein einer nachhaltigen Mobilität?; in:
ATZ Prod 7, 48–51 (2020); https://doi.org/10.1007/s35726-020-0086-z

S. Kroll, D. Iliew, M. Große, R. G. Berger, A. Siebert-Raths
Thermoplastic biocomposites based on agro waste materials: Wheat straw fibres and their effect on reinforcement, filling and odour formation; in:
ipw / bio-fibre magazine 5-6/2020, S. 10-14

C. Arndt, A. Siebert-Raths
Marine biodegradable plastics: A solution option to the Marine Litter problem?; in:
bioplastics magazine, 3-2020, S. 64-65

H.-J. Endres, M. Mudersbach, H. Behnsen, S. Spierling (Hg.)
Biokunststoffe unter dem Blickwinkel der Nachhaltigkeit und Kommunikation, Wiesbaden 2020; DOI: 10.1007/978-3-658-27795-6

2019

D. Iliew, S. Kroll, A. Siebert-Raths
Compoundierung von naturfaserverstärkten Kunststoffen; in:
Klemens Kohlgrüber, Michael Bierdel, Harald Rust (Hg.): Polymer-Aufbereitung und Kunststoff-Compoundierung: Grundlagen, Apparate, Maschinen, Anwendungstechnik, München 2019, S. 270-279

IfBB – Institut für Biokunststoffe und Bioverbundwerkstoffe (Hg.)
Biopolymers – facts and statistics 2019, Hannover 2019

M. Shamsuyeva, O. Hansen, H.-J. Endres
Review on hybrid carbon-/flax composites and their properties; in:
International Journal of Polymer Science (being revised)

J. Winkelmann, M. Shamsuyeva, H.-J. Endres
Hybrid Fabrics for Use in Bio-Based Composites and Their Applications; in:
Materials Today: Proceedings Volume 31, Supplement 2, 2020, S. 263-268

N. Vellguth, T. Rudeck, M. Shamsuyeva, F. Renz, H.-J. Endres
Thermal Stability of Natural Fibers via Thermoset Coating for Application in Engineering Thermoplastics; in:
Key Engineering Materials (2019); doi: 10.4028/www.scientific.net/kem.809.433

M. Shamsuyeva, J. Winkelmann, H.-J. Endres
Manufacture of hybrid natural / synthetic fiber woven textiles for use in technical biocomposites with maximum biobased content; in:
Journal of Composites Science (2019); doi: 10.3390/jcs3020043

J. Teuwsen, F. Bittner, J. P. Steffen, H.-J. Endres
Evaluation of X-ray target materials to improve CT-based measurement of fiber orientations inside CF-SMC components”; in:
Conference proceedings: International Symposium on Digital Industrial Radiology and Computed Tomography – DIR2019, Fürth, 2.-4. Juli 2019

N. Lack, H.-J. Endres
Agrarfolien - in Kreisläufen denken; in:
Land & Forst: Landwirtschaft und Landleben in Niedersachsen, 172 (6), 2019, S. 12-13

N. Lack, H.-J. Endres
Biokunststoffe aus der Landwirtschaft; in:
LZ Rheinland 186 (10), 2019, S. 25-26

N. Lack, H.-J. Endres
Müllvermeidung und nationale Wertschöpfung. Biokunststoffe aus der Landwirtschaft; in:
Bauernblatt 169 (2019), S. 47-48

N. Lack, H.-J. Endres
Kunststoffe aus der Landwirtschaft; in:
Schweizer Landtechnik, April 2019, S. 52–53

F. Bittner, J. Winkelmann, H.-J. Endres
Verarbeitung von Recycling-Carbonfasern zu leistungsfähigen unidirektionalen Verbundwerkstoffen; in:
Tagungsband 9. Wissenschaftskongress Abfall- und Ressourcenwirtschaft, Amberg-Weiden, 14.-15. März 2019, insbruck university press, ISBN: 978-3-903187-48-1, S. 137-141

2018

IfBB – Institut für Biokunststoffe und Bioverbundwerkstoffe (Hg.)
Biopolymers – facts and statistics 2018, Hannover 2018

O. Hansen, C. Habermann, H.-J- Endres
Bio-based Materials for Exterior Applications – Project BioHybridCar; in:
K. Dröder, T. Vietor (Hg.): Technologies for economical and functional lightweight design. Conference proceedings 2018 (Zukunftstechnologien für den multifunktionalen Leichtbau), ISBN 978-3-662-58206-0, S. 189-200

F. Bittner, M. Bellmann, M. Shamsuyeva, H-J. Endres, W. Viöl
Improving the Durability of Bio Hybrid Fiber Reinforced Plastics by Plasma Treatment; in:
K. Dröder, T. Vietor (Hg.): Technologies for economical and functional lightweight design. Conference proceedings 2018 (Zukunftstechnologien für den multifunktionalen Leichtbau), ISBN 978-3-662-58206-0, S. 201-212

N. Vellguth, M. Shamsuyeva, S. Kroll, F. Renz, H-J. Endres
Electrical conductivity in biocomposites via polypyrrole coating; in:
Journal of Materials Science Materials in Electronics, 2018, DOI: 10.1007/s10854-018-0510-2

M. Neudecker, H.-J. Endres, A. Siebert-Raths, R. Messing, P. F. Filz
Digital Preview of Bio-Based Parts. Injection molding simulation of bioplastics. Comparison of bioplastics simulation and real injection moulding process; in:
Kunststoffe international 2018/11, S. 46-49

M. Neudecker, H.-J. Endres, A. Siebert-Raths, R. Messing, P. F. Filz
Virtuelle Vorschau auf biobasierte Bauteile; in:
Kunststoffe, 11/2018, S. 94-97

D. Jahn, S. Spierling, A. Siebert-Raths
From coffee grounds to plastic; in:
bioplastics magazine, 04-2018, S. 44-46

M. Weinert, N. Lack, A. Siebert-Raths
Multiple Perspektiven. Schrumpffolien aus PLA und Bio-PE im Vergleich zu konventionellem PE; in:
Kunststoffe 8-2018, S. 55-58

M. Neudecker, N. Lack, H-J. Endres
Dimensional stability of injection moulded bioplastics; in:
bioplastics magazine, 03-2018, S. 14-15

V. Venkatachalam, S. Spierling, , H.-J. Endres, A. Siebert-Raths
IIntegrating Life Cycle Assessment and Eco-design Strategies for a Sustainable Production of Bio-based Plastics; in:
E. Benetto, K. Gericke, M. Guiton (Hg.): Designing Sustainable Technologies, Products and Policies, Cham 2018, S. 487-597, DOI: https://doi.org/10.1007/978-3-319-66981-6

L. Mundzeck, A. Siebert-Raths
Biokunststoffe in der neuen EU-Kunststoffstrategie 2018, in:
Müll und Abfall 6-2018, S. 305-309

C. Panescu, J. Winkelmann, H.-J. Endres
Quality Analysis of Downcycling Processes for Carbon Recyclates; in:
bio-fibre Magazine, 5-6/2018, S. 2-7

V. Venkatachalam, S. Spierling, R. Horn, H.-J. Endres
LCA and Eco-design: Consequential and Attributional Approaches for Bio-based Plastics; in:
Procedia CIRP, Volume 69, 2018. S. 579-584, doi: https://doi.org/10.1016/j.procir.2017.11.086

F. Bittner, H.-J. Endres
Investigation of Failure Mechanisms in Hybrid Fiber-Reinforced Plastics by Means of In-Situ-CT; in:
Hybrid - Materials and Structures 2018 - Proceedings, Bremen 2018, ISBN 978-3-88355-417-4, S. 114-119

S. Spierling, C. Röttger, V. Venkatachalam, M. Mudersbach, C. Herrmann, H.-J. Endres
Bio-based Plastics – A Building Block for the Circular Economy?; in:
Procedia CIRP, Volume 69, 2018. S. 573-578, doi: https://www.sciencedirect.com/science/article/pii/S2212827117307849

D. Jahn, L. Mundzeck, H.-J. Endres
Mehr als kalter Kaffee; in:
Technologie-Informationen, 1+2/2018, S. 18

C. Panescu, A. Dörgens, L. Mundzeck, H.-J. Endres
Biohybridwerkstoffe für die Luftfahrt; in:
Technologie-Informationen, 1+2/2018, S. 17

H. Behnsen, S. Spierling, H.-J. Endres
Biobasierte Kunststoffe als Produkt der Bioökonomie; in:
Ökologisches Wirtschaften, 1/2018, S. 28-29, DOI: http://dx.doi.org/10.14512/OEW330128

S. Milovanovic, G. Hollermann, C. Errenst, J. Pajnik, S. Frerich, S. Kroll, K. Rezwan, J. Ivanovic
Supercritical CO2 impregnation of PLA/PCL films with natural substances for bacterial growth control in food packaging; in:
Food Research International 107-2018, P. 486-495

B. Plinke, F. Bittner, H.-J. Endres
Messung der Dichteverteilung in Holzpartikelwerkstoffen in drei Dimensionen mit Computertomographie; in:
A. Wagenführ: Tagungsband des 18. Holztechnologischen Kolloquiums, Dresden, 12.-13. April 2018, ISBN: 978-3-86780-558-2, S. 208-217

Partner des BMEL-Verbundvorhabens: Nachhaltige Verwertungsstrategien für Produkte und Abfälle aus biobasierten Kunststoffen
PLA-Abfälle im Abfallstrom; in:
Müll und Abfall 4-2018, S. 200-202

Spierling, E. Knüpffer, H. Behnsen, M. Mudersbach, H. Krieg, S. Springer, S. Albrecht, C. Herrmann, H.-J. Endres
Bio-based plastics – A review of environmental, social and economic impact assessments; in:
Journal of Cleaner Production, Volume 185, June 2018, S. 476-491

C. Haxter, H.-J. Endres
Faserverstärkte Duromere – nicht recycelbar? Doch!; in:
kunststoffland NRW report, Ausgabe 1-2018, S. 38

L. Mundzeck, H.-J. Endres
PLA-Abfälle im Abfallstrom; in:
Kunststoffxtra, 1-2/2018, S. 29

2017

IfBB – Institut für Biokunststoffe und Bioverbundwerkstoffe (Hg.)
Biopolymers – facts and statistics 2017, Hannover 2017

H.-J. Endres, A. Siebert-Raths, S. Spierling, L. Mundzeck
Biokunststoffe im Einsatz für eine nachhaltige Wirtschaft; in:
Technologie-Informationen, 4/2017, S. 14-15

V. Venkatachalam, D. Jahn, S. Spierling, A. Siebert-Raths
Mechanical and environmental properties of recyclates from bio-based plastics; in:
Polymer Processing 11/2017, S. 617-622, ISSN: 1429-0472

B. Plinke, F. Bittner, H.-J. Endres
Dichteverteilung und Partikelstrukturen von Holzwerkstoffen – Computertomographie an „kleinen“ und „großen“ Proben. Kurzoriginal; in:
Tagungsband zum 12. Holzwerkstoffkolloquium, Dresden, 14.-15. Dezember 2017, S. 12-13

M. Mudersbach, S. Spierling, H. Behnsen, E. Knüpffer, S. Albrecht, H. Krieg, C. Schulze, C. Herrmann, H.-J. Endres
Wie „bio“ sind Biokunststoffe? Die Nachhaltigkeit von zuckerbasierten und konventionellen Kunststoffen im Fokus; in:
V. Koesling, R. Spierling (Hg.): Alles Zucker! Nahrung – Werkstoff – Energie, Neue Beiträge zur Technikgeschichte und Industriekultur, Schriftenreihe der Stiftung Deutsches Technikmuseum Berlin, Bd. 2, Berlin-Brandenburg 2017, S. 227-237

H.-J. Endres
Bio-Based Thermoplastic and Thermosets Polymer; in:
Omar Faruk, Jimi Tjong, Mohini Sain (Hg.): Lightweight and Sustainable Materials for Automotive Applications, Boca Raton u.a. 2017, ISBN: 978-1498756877

M. Shamsuyeva, H.-J. Endres
Polyelectrolyte Treatment of Cellulose Fibers for the Manufacture of Novel Bio-Hybrid Fiber Composites (bio-HFC) for Lightweight Applications; in:
Key Engineering Materials, Vol. 742, pp. 389-394, ISSN: 1662-9795, doi: 10.4028/www.scientific.net/KEM.742.389

J. Leciński, A. Siebert-Raths, D. Jahn
Effect of acrylic core-shell impact modifier on processing and thermos-mechanical properties of stereocomplex poly(lactic acid); in:
ANTEC® 2017 - Anaheim, California, USA May 8-10, 2017, Society of Plastics Engineers, ISBN: 978-0-692-88309-9, S. 431-437

H.-J. Endres
10 Years Ago; in:
Bioplastics magazine, 3/2017, S. 42

E. M. Mentzel, H.-J. Endres
Biokunststoffe; in:
M. Myska (Hg.): Der TÜV-Umweltmanagement-Berater. TÜV Media GmbH, 2017, 5. Ergänzung / Aktualisierung, Mai 2017, Kap. 09004

S. Rettenberger, F. Bittner, H.-J. Endres, J. Hiller
Blick in belastete Composite-Bauteile - In-Situ-CT 4-Punkt-Biegeversuche für die FVK-Entwicklung; in:
Konstruktion, Mai 5-2017, IW10-IW13

H.-J. Endres
Bioplastics, in:
Advances in Biochemical Engineering/Biotechnology, Biorefineries, Springer Berlin/Heidelberg 2017, S. 1-42; DOI: 10.1007/10_2016_75

M. Shamsuyeva, H.-J. Endres
Polyelectrolyte Treatment of Cellulose Fibers for the Manufacture of Novel Bio-Hybrid Fiber Composites (bio-HFC) for Lightweight Applications; in:
Key Engineering Materials, 742, S. 389-394

D. Bellusova, S. Mauer, H.-J. Endres
Mechanisches Recycling von Polylactid-Abfall; in:
Tagungsband „Waste to Ressources 2017“, Hannover, 16.-18. Mai 2017, Göttingen 2017, S. 254-265

D. Jahn, A. Siebert-Raths, H.-J. Endres
Long-term Stability of Bio-Based Plastics – Investigation of the Effectiveness of Hydrolysis Stabilizers by Means of DSC; in:
OnSet, S. 14-17

auch erschienen als:
D. Jahn, A. Siebert-Raths, H.-J. Endres

Langzeitbeständigkeit von biobasierten Kunststoffen – Untersuchung der Wirkungsweise von Hydrolysestabilisatoren mittels DSC; in:
OnSet, S. 14-17

L. Henke, N. Zarrinbakhsh, H.-J. Endres, M. Misra, A. K. Mohanty
Biodegradable and Bio-based Green Blends from Carbon Dioxide-Derived Bioplastic and Poly(Butylene Succinate); in:
Journal of Polymers and the Environment 25 (2017), S. 499-509; DOI: 10.1007/s10924-016-0828-x

K. Albrecht, J. Müssig, E. Baur, H.-J. Endres, R. Gente, N. Graupner; M. Koch, M. Neudecker, T. Osswald, P. Schmidtke, S. Wartzack, K. Webelhaus
Measuring fibre orientation in sisal fibre-reinforced, injection moulded polypropylene - Pros and cons of the experimental methods to validate injection moulding simulation; in:
Journal Composites Part A, Applied Science and Manufacturing 95 (2017), S. 54–64

H.-J. Endres, C. Uthoff, M. Nelles
Filler with Lightweight Potential. Recycling of Natural Fiber-Reinforced Polymers to Sustainable Pyrolysis Char Filler; in:
Kunststoffe international 3/2017, S. 62–65
 

auch erschienen als:
H.-J. Endres, C. Uthoff, M. Nelles

Alles hat ein Ende, nur der Kunststoff nicht. Recycling naturfaserverstärkter Polymere zum nachhaltigen Füllstoff Pyrolysekohle; in:
Kunststoffe 3-2017, S. 88-92

H.-J. Endres
Bio-based thermoplastic and thermosets polymer; in:
O. Faruk, J. Tjong, and M. Sain (eds.): Lightweight and Sustainable Materials for Automotive Application, CRC Press, Boca Raton, FL 2017, S. 139-166

O. Hansen, C. Panescu, H.-J. Endres, A. Goldin
Natural Fire Reinforced Plastics for Aviation Application; in:
Bio-fibre magazine, 1-2/2017, S. 14-19

2016

J. Lecinski, A. Siebert-Raths, D. Jahn, J. Rutz
The fair PC mouse; in:
bioplastics MAGAZINE, 5/2016, S. 24-27

M. Shamsuyeva, H.-J. Endres
Various Sectors Benefit from Bio-Hybrid Fiber Composite; in:
bio-fibre Magazine, 12/2016, S. 218-19, ISSN: 1515-1720

IfBB – Institut für Biokunststoffe und Bioverbundwerkstoffe (Hg.)
Biopolymers – facts and statistics 2016, Hannover 2016

J. Bauer, C. Westphalen, W. Bidlingmaier, M. Hiebel, D. Maga, S. Kabasci, T. Hartmann, L. Kroll, A. Dörgens, A. Siebert-Raths, T. Fell, M. Mäurer, K. Jesse, A. Lieske, D. Bellušová, S. Mauer, H.-J. Endres
Nachhaltige Verwertungsstrategien für Abfälle aus biobasierten Kunststoffen - Die Rohstoffkosten mittels Recycling senken; in:
Plastverarbeiter, 22.07.2016

H.-J. Endres, A. Siebert-Raths
Co-Polyester; in:
bioplastics MAGAZINE, 5/2016, S. 60-61

M. Neudecker, H.-J. Endres
Wall thickness dependent flow characteristics of bioplastics; in:
bioplastics MAGAZINE, 3/2016, S. 22-23

D. Bellušová, S. Mauer, H.-J. Endres
Lösen Biokunststoffe unser Plastikproblem?; in:
Oekoskop - Fachzeitschrift der Ärztinnen und Ärzte für Umweltschutz, Basel - Schweiz, Ausgabe 2/16

S. Albrecht, H.-J. Endres, E. Knüpffer, S. Spierling
Biokunststoffe – quo vadis? Eine ökologische und sozio-ökonomische Betrachtung; in:
uwf UmweltWirtschaftsForum, 24 (2016), S. 55-62, DOI 10.1007/s00550-016-0390-y
Auch erschienen als Online-Version: http://link.springer.com/article/10.1007/s00550-016-0390-y/fulltext.html [18.05.2016]

C. Vogt, H.-J. Endres, J. Bühring, H. Menzel
Reduction of the Elongation at Break of Thermoplastic Polyolefins through Melt Blending with Polylactide and the Influence of the Amount of Compatibilizers and the Viscosity Ratios of the Blend Components on Phase Morphology and Mechanics; in:
Polymer Engineering and Science 2016: http://onlinelibrary.wiley.com/doi/10.1002/pen.24319/abstract [18.05.2016]

Hochschule Hannover, IfBB (Hg.)
Verarbeitung von Biokunststoffen – ein Leitfaden, Hannover 2016

H.-J. Endres, J. Henkel, A. Siebert-Raths
Beitrag abbaubarer Kunststoffe zur Marine-Litter-Problematik; in:
Kunststoffe 1/2016, S. 20-22

H.-J. Endres
Biobasierte Kunststoffe – Modetrend oder Polymerwerkstoffe der Zukunft?; in:
initiativ. ContiTech. Das Contitech Magazin, 01/2016, S. 12-15

2015

C. Vogt, H.-J. Endres, J. Bühring
Making tailor-made high performance Thermoplastic Polyolefin (TPO)/ Polylactide (PLA) blends for automotive interior applications by irradiation; in:
73rd Annual Technical Conference of the Society of Plastics Engineers 2015

IfBB – Institut für Biokunststoffe und Bioverbundwerkstoffe (Hg.)
Biopolymers. Facts and statistics 2015, Hannover 2015

N. Lack-Ersöz, H.-J. Endres
„Bio“ – die neue Art Kunststoff; in:
Industrieanzeiger, 137. Jahrgang, 26/2015, 5.10.2015, S. 16

H. Behnsen, H.-J. Endres, C. Habermann, F. Jürgens, N. Lack, J. Sambleben, C. Schulz, A. Siebert-Raths, S. Spierling
Zahlen, Daten, Fakten. Eine Betrachtung des Biokunststoffmarktes; in:
GIT Laborfachzeitschrift, 59. Jahrgang, 9-2015, S. 35-37

H.-J. Endres, F. Jürgens, C. Habermann, S. Spierling, H. Behnsen, C. Schulz
Eine nachhaltige Alternative? Über Sinn und Unsinn des Einsatzes von Biokunststoffen; in:
Kunststoffe 7/2015, S. 22-27

H.-J. Endres
Market overview, processing routes, feedstock requirements and land use of bio-based plastics; in:
Green Polymer Chemistry 2015 - Conference Proceedings, Köln 2015, Paper 1

M. Neudecker, H.-J. Endres
Bioplastics injection moulding;
in: bioplastics MAGAZINE, 3/2015, S. 18-19

T. Koplin, H.-J. Endres, A. Siebert-Raths
Influence of cellulosic filler content and morphology on the drying and processing of polylactide acid (PLA) composites; in:
Annual technical conference of the society of plastic engineers 2015 (ANTEC 2015), Orlando, 2015

H.-J. Endres
Vehicle body made from cotton, hemp, and wood; in:
RESEARCH NEWS der Fraunhofer-Gesellschaft, 01, 2015, topic 4

auch erschienen als:
H.-J. Endres

Karosserie aus Baumwolle, Hanf und Holz; in:
FORSCHUNG KOMPAKT der Fraunhofer-Gesellschaft, 01, 2015, Thema 4

2014

S. Spierling, T. Koplin, H.-J. Endres
Hemp fines – an agricultural by-product for biocomposites? A holistic approach; in:
ST Smith (ed.), 23rd Australasian Conference on the Mechanics of Structures and Materials (ACMSM23), Vol. 2, 9-12 December, Lismore, Byron Bay

H.-J. Endres, A. Siebert-Raths, H. Behnsen, C. Schulz
Biopolymers facts and statistics 2014, Hannover 2014

H.-J. Endres, C. Habermann, S. Spierling
Naturfaserverstärkte Kunststoffe und mineralhaltige Verbundwerkstoffe im Vergleich. Bio im Kunststoff; in:
Plastverarbeiter 02.10.2014, S. 88-91

M. Neudecker, H. Endres
Processing and manufacturing of natural fiber reinforced plastics to specimens for generating simulation data (NFC-simulation); in:
72nd Annual Technical Conference of the Society of Plastics Engineers 2014 (ANTEC 2014), Las Vegas, Nevada, USA 28-30 April 2014, Volume 1 of 3

T. Koplin, H.-J. Endres, G. Ziegmann, A. Siebert-Raths
Influence of moisture of the basic raw materials on the mechanical and rheological properties of Polylactide cellulose fiber composites made by twin screw extrusion; in:
72nd Annual Technical Conference of the Society of Plastics Engineers 2014 (ANTEC 2014), Las Vegas, Nevada, USA 28-30 April 2014, Volume 1 of 3

H.-J. Endres, C. Habermann
The Project: Sustainability Racing – The Vision: Mobility of the Future; in:
J. Wellnitz, A. Subic, R. Trufin (Hg.): Sustainable automotive technologies 2013. Proceedings of the 5th International Conference ICSAT 2013, Cham u.a. 2014, S. 269-275

H.-J. Endres
Biokunststoffe – Verpackungswerkstoffe der Zukunft?; in:
DMZ 11/2014, S. 20-23

D. Jahn, H.-J. Endres et.al.
Naturally Cost-Effective; in:
Kunststoffe International 05/2014, S. 36-38

Auch erschienen als:
D. Jahn, H.-J. Endres u.a.
Natürlich auch wirtschaftlich; in:
Kunststoffe 05/2014, S. 68-71

H.-J. Endres, M. Kohl, H. Behnsen
Biobasierte Kunststoffe und biobasierte Verbundwerkstoffe; in:
Fachagentur Nachwachsende Rohstoffe (Hg.): Marktanalyse Nachwachsende Rohstoffe, Schriftenreihe Nachwachsende Rohstoffe, Bd. 34, Rostock 2014, S. 200-310

2013

H.-J. Endres, A. Siebert-Raths
Biological Resistance (Chapter 2.6) and Biodegradable Plastics (Chapter 5.6.2); in:
G. Ehrenstein, S. Pongratz (Hg.): Resistance and Stability of Polymers, München 2013, S. 222-240

T. Koplin, H.-J. Endres, G. Ziegmann
Characterization of the property-defining Parameters for Compounding of Polypropylene with Cellulose Fibers; in:
6th International Wood Fibre Polymer Composites Symposium, Proceedings, Session 2B: Recent Progress on Products and Technologies, FCBA Institut Technologique, Biarritz 2013

P. Helmke, H.-J. Endres, M. Nelles
Spritzgießen von cellulosefaserverstärktem Polypropylen für Interieuranwendungen; in:
VDI-Wissensforum GmbH/VDI-Gesellschaft Materials Engineering (Hg.): Kunststoffe im Automobilbau, Düsseldorf 2013, S. 33-40

A.-S. Kitzler
Kaskadennutzung von Biopolymeren- Grundlegende Untersuchung zur Entsorgung von Biopolymeren. Dissertation, Rostock 2013

D. Jahn, A. Siebert-Raths, H.-J. Endres
Biokunststoffe als Kunststoffe der Zukunft, Teil II; in:
Cebra. Zeitschrift für effiziente Beschaffung rund um Büro und Arbeitsplatz, Oktober 8-2013, S. 36

H.-J. Endres
Biokunststoffe als Werkstoffe der Zukunft; Teil I; in:
Cebra. Zeitschrift für effiziente Beschaffung rund um Büro und Arbeitsplatz, April, 3-2013, S. 48-50

T. Koplin, H.-J. Endres, G. Ziegmann
Influence of the melting zone on compounding of cellulose fiber reinforced polylactide; in:
71st Annual Technical Conference of the Society of Plastics Engineers 2013 (ANTEC 2013), Cincinnati, Ohio, USA 22-24 April 2013, Volume 1 of 3

A.-S. Kitzler, H.-J. Endres
Kaskadennutzung von Biopolymeren – Grundlegende Untersuchungen zur Entsorgung von Biopolymeren; in:
3. Wissenschaftskongress Abfall- und Ressourcenwirtschaft, DGAW, Stuttgart, März 2013, S. 31–36

2012

A. Siebert-Raths
Modifizierung von Polylactid (PLA) für technische Anwendungen: verfahrenstechnische Optimierung der Verarbeitungs- und Gebrauchseigenschaften, Rostock 2012

M. Bengs, H.-J. Endres, A. Siebert-Raths
„Market situation and possibilities for information procurement of biopolymers (Biopolymer Database)”; in:
70th Annual Technical Conference of the Society of Plastics Engineers 2012 (ANTEC 2012), Volume 1 of 3, S. 177-181

H.-J. Endres, T. Koplin, C. Habermann, M. Neudecker
„Compounds: Eco-Friendly and Cost-Effective“; in:
Kunststoffe international 12/2012, S. 27–31

Auch erschienen als:
H.-J. Endres, T. Koplin, C. Habermann, M. Neudecker
Compounds: Umweltfreundlich und wirtschaftlich“; in:
Kunststoffe 12/2012, S. 40–44

H.-J. Endres, C. Schulz
Biopolymere in die Spritzgießmaschine; in:
Industrieanzeiger, 24/2012, S. 47-49

H.-J. Endres
Mehrfachnutzen. Biobasierte Kunststoffe; in:
Unternehmermagazin 4-5/2012, S. 20-21

H.-J. Endres, A. Siebert-Raths
Performance Profile of Biopolymers Compared to Conventional Plastics; in:
K. Matyjaszewski, M. Möller: Polymer Science: A Comprehensive Reference, Vol. 10, Amsterdam 2012, S. 317-353

A.-S. Kitzler, H.-J. Endres, M. Nelles
Recyclingfähigkeit von Biokunststoffen; in:
Tagungsband 15. Dialog Abfallwirtschaft MV Rostock, Juni 2012, S. 121-132

H.-J. Endres, T. Koplin, C. Habermann
Technology and Nature Combined? – Biocomposites; in:
Kunststoffe International 06/2012, S. 18-21

Auch erschienen als:
H.-J. Endres, T. Koplin, C. Habermann
Technik und Umwelt vereint? – Bioverbunde; in:
Kunststoffe 06/2012, S. 20-24

T. Koplin, H.-J. Endres
Influence of fiber morphology on material properties of NFC; in:
Andrzej K. Bledzki, Volker E. Sperber: Tagungsband 9th WPC, Natural Fibre and other innovative Composites Congress and Exhibition, 19.- 20. Juni 2012, Stuttgart/Fellbach

H.-J. Endres
Bioconcept Car – Synergy of Bioplastics and Biocomposites; in:
Andrzej K. Bledzki, Volker E. Sperber: Tagungsband 9th WPC, Natural Fibre and other innovative Composites Congress and Exhibition, 19.- 20. Juni 2012, Stuttgart/Fellbach

A.-S. Kitzler, H.-J. Endres, A. Schettler, M. Nelles
Neue Verwertungswege; in:
RECYCLING magazin 08/2012, S. 68-71

A.-S. Kitzler, H.-J. Endres, M. Nelles
Kaskadennutzung von Biopolymeren durch vorteilhafte Entsorgungsoptionen; in:
Tagungsband 2. Wissenschaftskongress Abfall- und Ressourcenwirtschaft Rostock, März 2012, S. 271-277

A.-S. Kitzler, H.-J. Endres, A. Schettler, M. Nelles
Basics of the 14C methode – how to use radiocarbon dating to determine the biobased carbon content; in:
bioplastics MAGAZINE 02/2012, S. 50-53

P. Helmke, H-.J. Endres, M. Nelles, T. Koplin
Coloring Cellulose Fiber - Reinforced Polypropylene; in:
Kunststoffe international 4/2012, S. 21-24

Auch erschienen als:
P. Helmke, H-.J. Endres, M. Nelles, T. Koplin
Einfärben von zelluloseverstärktem Polypropylen; in:
Kunststoffe 4/2012, S. 36-40

2011

M. Bengs, H.-J. Endres, A. Siebert-Raths, E. Baur
„Biopolymer database – Evaluating quantity, quality and comparability of biopolymer materials” in: 69th Annual Technical Conference of the Society of Plastics Engineers 2011 (ANTEC 2011), Volume 1 of 3, S. 216-218

A.-S. Kitzler, H-.J. Endres, M. Nelles
Vergärung von Biopolymer-Verpackungen – Eine sinnvolle Verwertungsoption?; in: Tagungsband – 8. Biogastagung Dresden 2011, Band 81, S. 117–122

H.-J. Endres, M. Bengs, C. Schulz, A. Siebert-Raths
Bioplastics - Market Opportunities, Land Use Requirement and Future Developments of Bioplastics; in: Kunststoffe International 9/2011, S. 54-58

Auch erschienen als:
H.-J. Endres, M. Bengs, C. Schulz, A. Siebert-Raths
Biopolymere - Marktchancen, Flächenbedarf und künftige Entwicklungen; in: Kunststoffe 9/2011, S. 105-110

H.-J. Endres, A. Siebert-Raths
Engineering Biopolymers, München 2011

H.-J. Endres
Biokunststoffe als nachhaltige Werkstoffe der Zukunft. Eine Orientierung von Hans-Josef Endres; in: creativ verpacken 5/2011, S. 24

H.-J. Endres, A.-S. Kitzler, M. Nelles, A. Siebert-Raths
Biopolymers as a Sustainable Alternative; in: Kunststoffe international 5/2011, S. 15-20

Auch erschienen als:
H.-J. Endres, A.-S. Kitzler, M. Nelles, A. Siebert-Raths
Biopolymere als nachhaltige Alternative?; in: Kunststoffe 5/2011, S. 34-40

A. Siebert-Raths, H.-J. Endres, S. de Vos, G.G.J. Schennink
Modification of Polylactide for Technical Applications; in: Kunststoffe international 5/2011, S. 61-65

Auch erschienen als:
A. Siebert-Raths, H.-J. Endres, S. de Vos, G.G.J. Schennink
Polylactid für technische Anwendungen modifizieren; in: Kunststoffe 5/2011, S. 99-104

H.-J. Endres, A. Siebert-Raths
Basics of PHA; in: Bioplastics Magazine 02/11, S. 12-15